Blazer Double Lock Nock

Press fit nock designed for "D"-loops. The Blazer® Nock has a double lock feature that is just tight enough to keep your shaft on your string while maintaining an incredibly clean release. Fits Easton Super Uni-Bushing system and standard carbon shafts. Made of durable, impact resistant polycarbonate. Weighs approximately 10.3 grains.
 

Blazer F Nock

The "F" Nock features the same throat system as the Blazer® Double Lock Nock to keep your shaft on your string during "let-down" while maintaining an incredibly clean release. Made of durable, impact resistant polycarbonate. Weighs approximately 6 grains.

Blazer Pin Nock

The Pin-Nock is available in 2 throat diameters, .088 & .120, to keep your shaft on your string during "let-down" while maintaining an incredibly clean release. Made of durable, impact resistant polycarbonate. Satin Chocolate available only while supplies last. Fits all "Pin" style nock inserts. Increased durabilty and accuracy. Weighs approximately 3 grains.

Blazer Vanes

This is the vane that has dropped more jaws, hung more trophies, convinced more skeptics, and provided more big silly grins than all the "Knock-Off", "Wanna-Be", "Copy-Cat" vanes combined! This is the vane that, hands down, out-performed them all! The Blazer® Vane, with its unique design, begins steering and correcting immediately. The combination of the steep leading edge angle and material stiffness enables the air to flow over the vane in a manner that actually creates lift. This leaves the tip of each vane inside undisturbed air, similar to the drafting principle used in auto racing. This airflow created by the precise leading edge angle allows the tip of each vane to act like a rudder, which is noticeable at longer distances with the flatter trajectory Blazer® Vanes provide. *Blazer ® Vanes are 1.987" long, with a profile height of .568" and weigh just 6 grains! They work great for cross bow bolts too!!

Blazer Helix Fletching Jig

The Blazer® Helix Jig, designed for standard carbon shafts, fletches your 2” vanes with a perfect 3 degree right helical. Places 3 vanes 120° apart. Easy set-up and simple operations; instructions included.

Helix Tower Fletching Jig

The most precise jig on the market. Place 3 vanes perfectly 120 degrees apart with one flip of the lever! This jig will fletch almost any size shaft with press fit nock removed, pin nock removed from pin, or crossbow bolt. Fletches 3 vanes at one time up to 2.25 inches in length on a 3° right helical. Helix Tower includes 5 center post options: Standard Carbon(.240 id), A-Nock(.201 id), F-Nock(.164 id), Xbow Bolts, and pin nocks