Monday, September 1, 2014 Silencers * Limbsaver Bow Silencers   Search

 Sponsor

Skin design and build by rhoek.com
Skin design and build by rhoek.com
 Bowhunting & Archery Articles
Nikon Rangefinders 2012-07-16

Bowhunting Range Finders350 AS

More...

Horton Crossbows 2012-07-05

Brotherhood

More...

Delta 2012-07-03

Tree Stand Buck

More...

Deer Antler Point Restrictions 2012-06-19

This proposal seeks to require that all antlered deer harvested in the area have at least three antler points on one side. The statewide requirement that hunters taking two bucks must ensure at least one of those bucks has four or more antler points on one side would remain in place.

More...

Top Bow 2012-05-30

It is June 9th, and we are in Gladwin, Michigan for one of the Michigan Bow Hunters District Three Super seven 3-D shoots, held at Top Bow Archery and Taxidermy. It was a beautiful day for a shoot. Temperature was in the low seventies, light breeze, and bright sun. I was shooting with my two brothers which made the shoot even better.

More...

Skin design and build by rhoek.com
Skin design and build by rhoek.com

 Check out these tips

Bow Weight Tip 2012-05-29

What is the right bow weight for a man sixty three years old just starting to hunt with a bow?

More...

Bow Hunting Practice Tip 2012-05-29

What is the best way to prepare for a bowhunt - Spot targets, or 3-D?

More...

Draw Weight for Moose Tip 2012-05-29

I am looking for the best set up for my Bowtech for a moose hunt in Maine. I am currently set at 50lbs with a 29 inch draw. Will it work for moose?

More...

Kenetic Energy Tip 2012-05-29

Does Draw weight matter if the arrow speed is the same between two bows?

More...

Sighting In Tip 2012-05-29

I have a new bowsite, but am having trouble sighting it in, help?

More...

Too Much Bow? Tip 2012-05-29

I just started shooting a compound bow, and I am having trouble drawing the bow.

More...

Bow Weight Tip 2012-05-29

I may want to hunt Elk or Bear in the future. My question is I am now looking at the new Hoyt Alpha Max 35 and I am not sure what pound draw/weight I should get.

More...

New Archer Tip 2012-05-29

I am considering taking up bow hunting. I am 54 years and in reasonably good
shape.

More...

Draw Weight for Deer Tip 2012-05-29

My son and I are looking into taking up bow hunting in Texas. For mainly white tail and possible hogs. What draw strength is needed for a recurve bow for this type of game?

More...

Speed or Kinetic Energy Tip 2012-05-29

Which is more important for hunting whitetail deer, speed or kinetic energy?

More...

Skin design and build by rhoek.com
Skin design and build by rhoek.com
 
Skin design and build by rhoek.com
Skin design and build by rhoek.com

 Limbsaver Silencers

This page display product information for Limbsaver Silencers.  Every bowhunter and archer alike needs a good silencer to add to his hunting and archery equipment.  Limbsaver offers quality product that any bowhunter and archer will enjoy.

For more information visit their website: www.limbsaver.com

Skin design and build by rhoek.com
Skin design and build by rhoek.com

 Limbsaver Silencers

 

Bowhunting Bow Silencers 

Everlast Leech

Navcom┬« technology stops string oscillation and noise by up to 90%. Extremely durable, your string will break before the Everlast Leech does. Simple to install. Made for high-poundage compound bows and crossbows.  

Bowhunting Bow Silencers 

 

Super Quad

Take the vibration and noise out of your limbs by up to 80% by installing a pair of Super Quad's. The innovative design is both extremely efficient and effective. And to make them even more versatile, the Super Quad can be used in both 1/2-3/4 and 3/4 to 1-1/8 split limb spacings. Just rotate the dampener to the side with the correct spacing and push the dampener between the limbs until you feel it sit in the grooves that hold it in place. No brackets or hardware are required for this universal application.  

 

 

UltraMax

Next-generation Navcom┬« material engineered with six independent sections dampens noise and vibration faster and more efficiently than ever. These LimbSavers reduce noise by up to 20db and dampen vibration by up to 80%. The result is quieter, more accurate performance. And they have a low-profile design and are lightweight. Solid-limb model installs easily with industrial-strength 3M adhesive. Per 2. 

 

Skin design and build by rhoek.com
Skin design and build by rhoek.com
 
Skin design and build by rhoek.com
Skin design and build by rhoek.com
 
Skin design and build by rhoek.com
Skin design and build by rhoek.com